This is what the loft was like on the monday morning when i started
After clearing away the old tank and stuff got the floor laid and some framing started
The completed loft after 5 days work ready to be plastered
View of the otherside of the completed loft with access hatch on right hand wall for storage space.
These are the old damaged doors that were to get replaced
Wood being marked out and cut in the workshop
The two doors just finished waiting to be primed
Setting out the deck and getting levels set
Frame of deck set out with step
Deck boards laid 
Completed deck with handrail and spindles
Window with damaged leaking putty
Step 1 chip out old putty and any flaking paint
Step 2 apply a bead of putty around the frame against the glass then with
The window frame after replacing rotten timbers
Side frame was badly rotten in 2 places so the timber was removed
Close up of the damaged timbers removed
Casement windows with all new putty glazing beads and flaking paint removed
Casement window partly renovated and one on the left not started yet
This is the start of a solid oak floor i have been fitting approx 50 sq metres
Another pic of the floor going down
2 louis oak half glazed doors paired up to form double door set
2 louis oak cupboard doors
View of both sets of double doors with solid oak standards and facings
This desk was designed to suit the customer as they had trouble getting their legs below a normal height desk and couldnt get one to fit in the space they had available
The existing up and over garage door was removed and the opening framed out to allow for a normal door to be fitted and the rest clad with pine.
Worcester oak door
Dordogne oak door with matching oak facings and skirtings
Dordogne oak glazed with matching oak facings and skirting
The original timbers were all rotten at the front of the garage but the rest were ok so i made new doors and re-clad the other parts .
Sink area awaiting marble top and dishwasher
Fridge freezer fitted into units and space left for oven
Tall wall unite fitted to conceal gas boiler
Cooking area
Rotten timbers
Floor after all the rotten joists had been removed.
New joists being laid over a damp proof membraine
The completed floor with 18mm chipboard covered with 6mm ply and sealed
New timbers being fitted to form new pitched roof
New roof completed with 18mm ply covered with 1 layer of underfelt then 1 layer of torch on green mineral felt
Front view of roof showing pitch of new roof wrapped in pvc facia to match existing facia
View of inside of wardrobes fitted out with shelving and hanging rails
Centre shelving
Finished wardrobes with beach effect slidding doors
